A special bent-clip type fastener for removable bar grating panels, available in aluminum stainless steel and galvanized steel. (Note: cross bars may need to be snipped in the field to facilitate placement of saddle clips.)
A special friction fastener used in conjunction with plank grating and embedded grating frames. When plank is banded, clips are installed by the manufacturer. Compatible with ¼” flange thickness.
For close-mesh aluminum grating (7/16” or 11/16” bearing bar centers), a countersunk land may be drilled by the grating manufacturer for use with a ¼” diameter TEK screw. (Note: Available for aluminum grating only. Not available for steel.)
A special friction fastener available in aluminum, stainless steel and galvanized steel used in conjunction with bar grating and embedded grating frames. (Note: Cross bars may need to be snipped in the field to facilitate placement of grating clamps.)
A plank lug inserted and tack welded between flanges, can serve as an anchor block for plank grating.
The most versatile clip anchor available is the Z Clip. These clips are especially helpful in holding down riveted grating. Z Clips are manufactured from stainless steel and are available in 1” (1” and 1-1/4” grating) 1-1/2” (1-1/2” and 1-3/4” grating) and 2” (2”, 2-1/4” and 2-1/2 grating) with a pre-punched hole to accept a 1/4” bolt or TEK screw.