Close-Mesh Bar Grating
To place an order or get a Quote:
Quote/Order Form
Close-mesh grating is similar to standard grating except
that the spacing of the bearing bars is closer, ranging from 7/16”
to 13/16”. It is suitable for applications requiring narrow
spacing for aesthetic or functional reasons.
Press Locked Bar Grating
Because this grating is a system of interlocking, perpendicular
bars, it provides a smooth clean look ideal for architectural
applications. It is used in the same structural applications as
its welded steel and rectangular aluminum counterparts.
Press-Locked Steel Bar Grating exhibits the same strength, long
life and openness as welded grating, although it is not
recommended for rolling loads. Instead of welding the joints,
however, tremendous hydraulic pressure is used to bond the two
close-tolerance slotted bars together. Permanent locksing is
achieved by forcing the deep cross bar into the notched bearing
bar.
Press-Locked Rectangular Aluminum Bar Grating is constructed with
the two close-tolerance slotted bars bonded together using
tremendous hydraulic pressure. Permanent locking is achieved by
forcing the deep cross bar into the bearing bar. Both the cross
bars and the bearing bars provide walking surfaces in the
press-locked design.
|
|
|
