|
|
 |
|
|
| |
Bar Grating Accessories
To place an order or get a Quote Quote/Order
Form
Saddle Clip
 A
special bent-clip type fastener for removable bar grating panels,
available in aluminum stainless steel and galvanized steel. (Note:
cross bars may need to be snipped in the field to facilitate
placement of saddle clips).
Plank Clip
 A
special friction fastener used in conjunction with plank grating
and embedded grating frames. When plank is banded, clips are
installed by the manufacturer. Compatible with ¼” flange
thickness.
Countersunk Land
 For
close-mesh aluminum grating (7/16” or 11/16” bearing bar centers),
a countersunk land may be drilled by the grating manufacturer for
use with a ¼” diameter TEK screw. (Note: Available for aluminum
grating only. Not available for steel.)
Grating Clamp
 A
special friction fastener available in aluminum, stainless steel
and galvanized steel used in conjunction with bar grating and
embedded grating frames. (Note: Cross bars may need to be snipped
in the field to facilitate placement of grating clamps.)
Plank Lug
A
plank lug inserted and tack welded between flanges, can serve as
an anchor block for plank grating.
Z Clip
 The
most versatile clip anchor available is the Z Clip. These clips
are especially helpful in holding down riveted grating. Z Clips
are manufactured from stainless steel and are available in 1” (1”
and 1-1/4” grating) 1-1/2” (1-1/2” and 1-3/4” grating) and 2” (2”,
2-1/4” and 2-1/2 grating) with a pre-punched hole to accept a 1/4”
bolt or TEK screw.
|
|
|
